phone Callback
8 800 500 00 33
8 812 605 00 33
St. Petersburg
Print page
VT3000 (+ milling function)
In stock

Main characteristics

Max. diameter of the workpiece to be machined 3400 mm
Max. diameter of the workpiece to be installed 3500 mm
Facing plate diameter  3000 mm
Max. height of the workpiece to be machined 1650 mm                    
Send request for the machine
Ask question

Description of construction

  • Solid cast slant-bed of high quality cast iron ensures high rigidity and vibration resistance
  • The design of the spindle unit ensures stable operation on high feed rates for both radial and axial loads
  • High-precision ball screws (C3 precision ground) with a double nut guarantee rigidity and accuracy even at long-term heavy loadings
  • The vertical position of Z axis provides the most stable cutting conditions compared to lathe machines that have a horizontal Z axis
  • Wide range of ATC
  • Machine could be equipped with automatic pallet changer
  • High spindle drive power
  • The “C” axis and the milling function significantly expand the technological capabilities of the machine, allow to perform milling, axial drilling and boring, thread cutting and other operations


Max. diameter of the workpiece to be installed   3500 mm
Max. diameter of the workpiece to be machined 3400 mm
Facing plate diameter  3000 mm   
Max. height of the workpiece to be machined
1650          mm
Max. weight of the workpiece to be machined
20000 kg


Spindle speed 2-120 rpm
Facing plate torque rating  68000 Nm   
Main motor power 60/75 (75/100)


X axis travel 2775 mm
Z axis travel 1100 (1400) mm
Crossrail travel  1150 mm   


Cutting feed range 0.01-50   mm/rev  
X axis rapid feed 10 m/min
Z axis rapid feed 10 m/min


No. of tools 12 (16, 30, 40)
Tool shank ВТ50   
Max. tool weight  50    kg   


Spindle speed 0-2500 rpm
Milling spindle torque rating 730      Nm
Milling spindle motor power 11/15


Ram section 280x280 mm    


6000 mm
Width (with chip cart)
8170 mm
Height 6700 mm
Weight 56000 kg

Packaging machine

Standard equipment

  • Fanuc 0i-TF CNC system
  • ATC for 12/16 tools
  • Chip conveyor and coolant tank
  • ZF (Germany) spindle gear box
  • Coolant station for spindle gear box
  • 4-jaw facing plate
  • BT50 tool connection in ram
  • Navigation system of crossrail
  • Auto lubrication system for guideways
  • Memory card slot
  • Handwheel
  • Heat exchanger
  • Coolant system (7 kg/cm2)
  • Crossrail clamping system
  • Protective covers for working area
  • Transformer
  • Leveling pads and anchor bolts
  • Tool kit
  • Operation manual


  • Fanuc 31i instead of Fanuc 0i-TF
  • ATC for 30, 40, 60 or 90 tools
  • Ram travel extension
  • Column height extension
  • Upgraded main motor power
  • Air conditioner for electrical cabinet
  • Coolant through spindle
  • Renishaw TS-20 tool measurement system
  • Renishaw RMP-60 workpiece measurement system
  • Heidenhain linear scales for X/Z axes
  • 10.4" TFT Screen Upgrade
  • Manual Guide for Fanuc 0i-TD CNC system
  • Facing plate with hydraulic clamping with 3-jaw, 4-jaw and 6-jaw
  • Hard jaws
  • ATC in hirth coupling
  • X and Z axes gear box 1:3
Send request for the machine VT3000 (+ milling function)
Ask question